D&L Designs is proud to be the sole U.S. distributor for the Flyboy I and Flyboy II sport models, designed by Chang hang Li of Guanxi, China.
The Flyboy I employs a symetrical airfoil and is a true ARF sport flyer. The model is fully aerobatic and is NOT a trainer, but a good second or third model. It comes completely pre-built, painted and covered.
The model is supplied with pre-painted fiber glass cowl and aluminum spinner with prop nut. The Fuselage is pre-built and painted, and is ready for installation of pre-built and covered tail group and landing gear. Wing is pre-built and covered and is ready for aileron servo installation. Motor mount, fuel tank, pushrods, control horns, landing gear, wheels, and nose wheel steering arm come with the kit.
An illustrated construction manual is supplied with the kit. The Flyboy I can be assembled in as little as 5 hours, ready to fly. The model has a wing span of 47 inches and a 410 square inch wing area. Recommended engine size is .25 to .40 displacement. Model requires a four channel radio driving four servos.